
3D-printed keychain
Your logo,
printed into the plastic.
A keychain in your colours with your logo as a solid colour layer, not a sticker. Every one carries an NFC chip and a QR code that open a link you can change for free.
from €10.00
one unit, no minimum
- Multi-colour printing, PLA or PETG
- NFC chip and QR code on every unit
- Printed in Malta, dispatched in 48h
What you get
Not a trinket. A printed object.
Logo in the plastic, not on it
The logo is printed as a separate colour layer with a multi-material printer. It cannot peel, scratch off or fade like a sticker or epoxy dome.
Any colour combination
Pick a base colour and a logo colour from the filament range. Brand colours, team colours, or the colour of your front door.
Built for a key ring
A reinforced loop, rounded edges and a body thick enough to survive a pocket, a bag and a car seat for years.
A chip and a QR code included
Every keychain carries an NFC chip and a printed QR code pointing at a short link you control. Tap it to open your contact card, website or anything else.

Materials
PLA for the look.
PETG for the pocket.
PLA prints the sharpest logo edges and comes in the widest colour range, but softens above about 55 degrees, so a summer dashboard can deform it. PETG tolerates heat and knocks and is what we recommend for anything that lives on a key ring.
The full comparison, including ABS and why we do not print it, is in PLA vs PETG vs ABS for everyday carry.
How to order
Two routes, depending on the shape.
Standard shape
Use the configurator
Pick colours, upload a single-colour logo or add text, preview it in 3D, order. Printed and dispatched within 48 hours.
Open the configuratorYour own shape or a multi-colour logo
Send a brief
A mascot outline, a coin, a three-colour crest. We prepare the file by hand, print a sample, then run the batch.
Custom projectsPrinted in PETG it handles heat, rain and being dropped. PLA is fine indoors and for gifts but can soften on a hot dashboard. The post on PLA, PETG and ABS explains the trade-off.
No. One keychain is a normal order. Packs are cheaper per unit, and from 50 units the bulk page has volume pricing.
Yes, through the custom projects page. Send a sketch or a logo outline and we print a sample before the batch. Multi-colour logos with three or four colours also go that route.
Tapping the keychain with a phone opens a short Tapora link. You decide where that link goes from a free dashboard and can change it at any time. If you never want to use it, it does no harm.
We print and dispatch within 48 hours of your order, tracked. EU deliveries usually arrive within one to three days of dispatch.
Printed in Malta
One keychain or a thousand.
Same logo, same print.
No subscription · NFC + QR on every unit · Free dashboard · Tracked shipping across Europe